• Model : BR1000G-IN
• Power Rating : 1000VA
• Output power Max : 600Watts
• UPS Type  : Line Interactive
• Waveform : Stepped Sine wave
• Battery Type  : Built-in Battery 
• Backup Time  : 6.5Min to 90Min
• Nominal Output Voltage : 230V
• Nominal Input Voltage : 230V
• Input Connections : India 3-pin 6A Cord
• Output Connections  : India 5-pin Sockets
• Application  : Computers and Electronics
• Warranty  : 2 years repair or replacement

BR1000G-IN Features

• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Adjustable voltage-transfer points
  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Building Wiring Fault Indicator
  This LED informs users of potentially dangerous wiring problems in the wall circuit.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
• Power-saving outlets
  Automatically cuts power to idle equipment to conserve electricity.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
• Serial connectivity
  Provides management of the UPS via a serial port.
• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

BR1000G-IN Technical Specifications

 Rear Side Image :